SVN rev. 1055 gave me the same problem, so I didn't try 1056. "cat /proc/rtnet/rtcfg/rteth0/state" gives me the following results:
Slave side state: ----------------- Before master starts: 2 (CLIENT_0) After master starts, script hanged: 3 (CLIENT_1) After master starts, success: 8 (CLIENT_READY) Master side: ------------ State is always "1 (SERVER_RUNNING)" "stations found", "stations ready", and "configured stations" are always 0, except when the slave is sucessfully connected. Then it becomes 1. Thinus -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Sent: 14 September 2006 15:37 To: Thinus Viljoen Cc: rtnet-users Subject: Re: [RTnet-users] rt_e1000 driver loading Thinus Viljoen wrote: > Hi > > I use the "rtnet" script to start/stop rtnet. At the moment my (only) > slave uses the rt_e1000 driver. The slave only starts sucessfully > occasionaly - must of the time it hangs at "Stage 1: searching for > master...". It probably starts successfully only 1 out of every 5 > times. > > However, if I put a small delay after "init_rtnet" in the script > (line 266), say about 3 seconds, it starts up every time. > > Any idea what the issue is? Perhaps a fixed time that the hardware > (or driver) need to initialize? > Let's exclude my own bugs first :-): Assuming that you are using the latest version (release 0.9.5 or SVN head), could you try if SVN rev. 1055 also suffers ("svn up -r 1055")? If not, please proceed to 1056. If already 1055 has problems: Check the state of the node under /proc/rtnet/rtcfg/rteth0/state, does it change after the master starts? This would indicate incoming packets. Then do the same the other way around, i.e check if the master's idea about the slave changes in /proc/rtnet/rtcfg/rteth0/CLIENT_xxx. Thanks, Jan ******************************************************************************************************* Disclaimer: The information contained in this communication is confidential and may be legally privileged. It is intended solely for the use of the individual or entity to whom it is addressed and others authorised to receive it. Any review, retransmission, dissemination, copying, disclosure or other use of, or taking of any action in reliance upon, this information by person or entities other then the intended recipient is prohibited. If you have received this message in error, please notify the sender immediately by e-mail, facsimile or telephone and return and/or destroy the original message and all copies from any computer. Denel (Pty) Ltd exercises no editorial control over e-mail messages originating in the organisation and does not accept any responsibility for either the contents of the message or any copyright laws that may have been violated by the person sending this message. Denel (Pty) Ltd is neither liable for the proper and complete transmission of the information contained in this communication nor any delay in its receipt. This message should not be copied or used for any purpose other than intended, nor should it be disclosed to any other person. ******************************************************************************************************* ------------------------------------------------------------------------- Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642 _______________________________________________ RTnet-users mailing list RTnet-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/rtnet-users
