Hello, I want to port a driver 10/100 Mb to RTnet. I'm working on a platform MPC85xx and I use this configuration : linux kernel 2.6.18 xenomai 2.3.4 rtnet 0.9.8
I want to know which driver should I port. I began with the source fs_enet-main.c in directory linux/drivers/net/fs_enet, is it good? I see some others drivers in arch/ppc/8260_io or 8xx_io, should I port one of these? I see also three drivers (rt_mpc82xx_fcc_enet.c, rt_mpc8xx_enet.c, rt_mpc8xx_fec.c) in drivers' directory of RTnet tree. Can I use one on these on my board? Is there lot of differences between driver for mpc82xx and mpc85xx? Can you give me some information about my task? is it hard or easy to port this driver? Julien The information in this e-mail is confidential. The contents may not be disclosed or used by anyone other then the addressee. Access to this e-mail by anyone else is unauthorised. If you are not the intended recipient, please notify Airbus immediately and delete this e-mail. Airbus cannot accept any responsibility for the accuracy or completeness of this e-mail as it has been sent over public networks. If you have any concerns over the content of this message or its Accuracy or Integrity, please contact Airbus immediately. All outgoing e-mails from Airbus are checked using regularly updated virus scanning software but you should take whatever measures you deem to be appropriate to ensure that this message and any attachments are virus free. ------------------------------------------------------------------------- Check out the new SourceForge.net Marketplace. It's the best place to buy or sell services for just about anything Open Source. http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketplace _______________________________________________ RTnet-users mailing list RTnet-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/rtnet-users
