On Wed, 18 Aug 2010 21:27:55 +0530 wrote >>prakash srinivasan wrote: > On Wed, 18 Aug 2010 00:28:53 +0530 wrote >>>> Am 17.08.2010 12:12, prakash srinivasan wrote: >>>> Dear all, >>>> >>>> I installed xenomai-2.5.3 on linux kernel 2.6.30.8. Now configuring the >>>> rtnet-0.9.12. I am getting the following error while configure, >>>> >>>> Checking for Xenomai version.... configure: error:*** Unsupported Xenomai >>>> version 2.5.3 in /usr/xenomai >>>> >>> How did you configure it? Please provide .rtnet_config or the configure >>> command line. >> >> I used the following command, >> >> ./configure --with-rtext=/usr/xenomai --with-linux=/usr/src/linux-2.6.30.8 >> --with-rtext-config=/usr/xenomai/bin/xeno-config >> --with-module-dir=/lib/modules/2.6.30.8 --enable-net-routing --enable-router >> --enable-examples >> >> >I guess direct configure usage requires better documentation. > >You can call ./configure in two ways. One is for RTAI and very old Xenomai: > >./configure --with-rtext=/path/to/rtai-installation > >Or you call it to install against today's Xenomai: >./configure--with-linux=/path/to/linux-source-with-xenomai-extension \ >--with-rtext-config=/path/to/xeno-config > >Do not mix both, specifically as you will switch to RTAI mode once you >specify --with-rtext. Many thanks Jan. I tried the same and its working fine. When I searched in the archives, few of them suggested to use --with-rtext for xenomai too. So we need to mention about it in the future document particularly NO NEED TO USE --with-rtext option for xenomai configuration. -Prakash
------------------------------------------------------------------------------ This SF.net email is sponsored by Make an app they can't live without Enter the BlackBerry Developer Challenge http://p.sf.net/sfu/RIM-dev2dev
_______________________________________________ RTnet-users mailing list RTnet-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/rtnet-users
