Dear list members, I noticed that the PBB packet tests, in contrast to the MPLS packet tests (i.e. those tests where you send PBB packets from the packet generator), currently get matched against their encapsulated payload, while the MPLS packets go through the 'Pop MPLS Header' step first. I think is is wrong. According to http://en.wikipedia.org/wiki/Provider_Backbone_Bridges PBB packets should get switched only according to their B-VID and B-DA values in the PBB header, and not according to their encapsulated payload. Therefore, if you want to test the encapsulated payload, the PBB header should be popped first, same like for MPLS packets. So, flow entries for popping the PBB header may need to be added to the tests.
Comments? Best Regards! Arne Goetje (高盛華) ------------------------------------------------------------------------------ Put Bad Developers to Shame Dominate Development with Jenkins Continuous Integration Continuously Automate Build, Test & Deployment Start a new project now. Try Jenkins in the cloud. http://p.sf.net/sfu/13600_Cloudbees _______________________________________________ Ryu-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/ryu-devel
