[email protected] (YAMAMOTO Takashi) wrote on 04/09/2014 02:04:12 PM: > > Dear list members, > > > > I noticed that the PBB packet tests, in contrast to the MPLS packet tests > > (i.e. those tests where you send PBB packets from the packet generator), > > currently get matched against their encapsulated payload, while the MPLS > > packets go through the 'Pop MPLS Header' step first. > > I think is is wrong. According to > > http://en.wikipedia.org/wiki/Provider_Backbone_Bridges PBB packets should > > get switched only according to their B-VID and B-DA values in the PBB > > header, and not according to their encapsulated payload. Therefore, if you > > want to test the encapsulated payload, the PBB header should be popped
> > first, same like for MPLS packets. > > So, flow entries for popping the PBB header may need to be added to the > > tests. > > > > Comments? > > which pbb tests are you talking about in particular? The majority of match and action tests have 4 test cases, for ether, vlan, mpls and pbb packets. I mean all of them for the pbb test case, at least the set-field test cases. Best Regards! Arne Goetje (高盛華) ------------------------------------------------------------------------------ Put Bad Developers to Shame Dominate Development with Jenkins Continuous Integration Continuously Automate Build, Test & Deployment Start a new project now. Try Jenkins in the cloud. http://p.sf.net/sfu/13600_Cloudbees _______________________________________________ Ryu-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/ryu-devel
