> Dear list members, > > I noticed that the PBB packet tests, in contrast to the MPLS packet tests > (i.e. those tests where you send PBB packets from the packet generator), > currently get matched against their encapsulated payload, while the MPLS > packets go through the 'Pop MPLS Header' step first. > I think is is wrong. According to > http://en.wikipedia.org/wiki/Provider_Backbone_Bridges PBB packets should > get switched only according to their B-VID and B-DA values in the PBB > header, and not according to their encapsulated payload. Therefore, if you > want to test the encapsulated payload, the PBB header should be popped > first, same like for MPLS packets. > So, flow entries for popping the PBB header may need to be added to the > tests. > > Comments?
which pbb tests are you talking about in particular? YAMAMOTO Takashi > > Best Regards! > Arne Goetje (葵憶仇) > ------------------------------------------------------------------------------ > Put Bad Developers to Shame > Dominate Development with Jenkins Continuous Integration > Continuously Automate Build, Test & Deployment > Start a new project now. Try Jenkins in the cloud. > http://p.sf.net/sfu/13600_Cloudbees > _______________________________________________ > Ryu-devel mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/ryu-devel ------------------------------------------------------------------------------ Put Bad Developers to Shame Dominate Development with Jenkins Continuous Integration Continuously Automate Build, Test & Deployment Start a new project now. Try Jenkins in the cloud. http://p.sf.net/sfu/13600_Cloudbees _______________________________________________ Ryu-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/ryu-devel
