Hey Dave; I don't know, how close do you have to get before they look bad? Pretty darn nice looking in the photos, and those appear closer than most people get to a car on the layout.
Pieter --- ctxmf74 <[EMAIL PROTECTED]> wrote: > --- In [email protected], "John Degnan" > Hi John, I just use a piece of .020 brass wire and > shape it to look > like a hose then solder on a small handle. I run the > wire back along > side the coupler box a ways then bend it 90 degree > up and melt it into > the floor or frame. After it's installed I paint the > hose part flat > black and the gladhand grey or dull silvr. The > gladhand part of the > wire gets flattened a bit and then a tiny drop of > solder. Up close > they don't look so hot but from normal viewing > distances they look > fine. Here's a couple of links to photos.......dave > http://pweb.netcom.com/~ctxm/airhose.jpg > http://pweb.netcom.com/~ctxm/airhose2.jpg > > > > > Yahoo! Groups Links > > > > > Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/S-Scale/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/S-Scale/join (Yahoo! ID required) <*> To change settings via email: mailto:[EMAIL PROTECTED] mailto:[EMAIL PROTECTED] <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
