HI All, I found that removing the additional bulb from the set had little effect SO:
I have 4) 1.2mm 15ma Miniatronics bulbs = 2 for side number boards, 1 for front number board, and 1 added for a cab light. 1 have 2) 1.2mm 30ma red bulbs for the front corner markers. All of the above are wired in parallel with 2 Radio Shack 271-1109 150 ohm resistors also wired in parallel. It equals about 75 ohms. Try it. It may work for you too. I will get back to you with the headlights later. Thank You, Bill Lane Modeling the Mighty Pennsy & PRSL in 1957 in S Scale since 1988 See my finished models at: http://www.lanestrains.com Look at what has been made in PRR in S Scale! Importing a Brass S Scale PRR X29 & G26 http://www.pennsysmodels.com PRR Builders Photos Bought, Sold & Traded (Trading is MUCH preferred) http://www.lanestrains.com/PRRphotos.xls ***Join the PRR T&HS*** The other members are not ALL like me! http://www.prrths.com http://www.lanestrains.com/PRRTHS_Application.pdf Join the Pennsylvania Reading Seashore Lines Historical Society It's FREE (for now) http://www.prslhs.com Preserving The Memory Of The PRSL See my Altoona train videos here http://www.myspace.com/billlane No virus found in this outgoing message. Checked by AVG Free Edition. Version: 7.5.467 / Virus Database: 269.7.0/804 - Release Date: 5/14/2007 4:46 PM Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/S-Scale/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/S-Scale/join (Yahoo! ID required) <*> To change settings via email: mailto:[EMAIL PROTECTED] mailto:[EMAIL PROTECTED] <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
