Hi Art, Your pics inspired me to add a couple pics to the photos section as well. This approach uses a 3/32" hollow brass tube to stiffen the throw. The two guide holes need to be drilled out slightly as does the frog tie or plate and the brass tubing needs trimmed to length after installation. Using this method, the throw adjuster bar can still be used if additional tension is required. Here is a link to the folder in the photo section:
http://ph.groups.yahoo.com/group/S-Scale/photos/browse/56e1 Regards, Tim Brown Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/S-Scale/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/S-Scale/join (Yahoo! ID required) <*> To change settings via email: mailto:[EMAIL PROTECTED] mailto:[EMAIL PROTECTED] <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
