--- In [email protected], "Roger Nulton" <[EMAIL PROTECTED]> wrote:
>
> Art and Tim,
>
> I'm using .047 piano wire made by K&S Engineering for my Bluepoint
and Tortoise machines. I bought it at my local Ace Hardware.
Hi Roger,
Thanks for the tip! As it turns out for my turnouts, I'll be going to
my local ACE on Tuesday morning. I'll pick up some .047 piano wire if
they have it and experiment on my Blue Point installations. Art also
mentioned to me to keep in mind that it doesn't necessarily equate to
more force on the frog point by adjusting the fulcrum nearer to the
lower end due to inherent spring in the wire. There is a balance of
throw VS. tension. Good point for my frog points.
Regards,
Tim Brown
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/S-Scale/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/S-Scale/join
(Yahoo! ID required)
<*> To change settings via email:
mailto:[EMAIL PROTECTED]
mailto:[EMAIL PROTECTED]
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
