Dear John,
We have 1.6 mm nut drivers for our 2-8-0. I was not able to find
this size in the US and imported them from our builder. Walthers used
to sell them, but I am not sure if they still have the smaller sizes.
Don
John Gibson wrote:
> Greetings:
>
> I need to purchase some nut drivers in the smaller metric sizes - 2.5
> mm and
> less - and was hoping for some suggestions identifying a reputable web
> vender. I checked Micro Mart and their smallest set duplicates what I
> already have and only goes down to 2.5 mm. I am pulling rods on HO and S
> scale locos and need at least a 2.0 mm nut driver (maybe smaller).
>
> Thanks for your help,
>
> John Gibson
>
> Rocklin, CA
>
> [Non-text portions of this message have been removed]
>
>
[Non-text portions of this message have been removed]
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/S-Scale/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/S-Scale/join
(Yahoo! ID required)
<*> To change settings via email:
mailto:[EMAIL PROTECTED]
mailto:[EMAIL PROTECTED]
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
