John, Don & All Try Wiha
http://www.wihatools.com/200seri/265serMM.htm Greenway carries them. Sam Don Thompson wrote: > Dear John, > We have 1.6 mm nut drivers for our 2-8-0. I was not able to find > this size in the US and imported them from our builder. Walthers used > to sell them, but I am not sure if they still have the smaller sizes. > Don > > John Gibson wrote: > > > Greetings: > > > > I need to purchase some nut drivers in the smaller metric sizes - 2.5 > > mm and > > less - and was hoping for some suggestions identifying a reputable web > > vender. I checked Micro Mart and their smallest set duplicates what I > > already have and only goes down to 2.5 mm. I am pulling rods on HO and S > > scale locos and need at least a 2.0 mm nut driver (maybe smaller). > > > > Thanks for your help, > > > > John Gibson > > > > Rocklin, CA Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/S-Scale/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/S-Scale/join (Yahoo! ID required) <*> To change settings via email: mailto:[EMAIL PROTECTED] mailto:[EMAIL PROTECTED] <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
