--- In [email protected], Richard Karnes <[EMAIL PROTECTED]> wrote:
>
> Gents --
>
> A little-known fact is that current NASG-standard wheel sets will
operate properly on old NMRA-standard track. For old-standard
turnouts, one must shave the frog points a tad with a Dremel cut-off
disk. Much easier than ripping up track.
>
> And a footnote: Current NMRA track and wheel standards are the same
as NASG standards.
>
> Dick Karnes
___________________________________________
Dick:
THANK YOU! THANK YOU! THANK YOU! That's exactly what I tried to make
it clear to you and other detractors back when you were slamming the
Shinohara #6 switch even though you and others had to admit "it
worked, but you didn't know why".
And now I'll tell you another little secret, although it really wasn't
a secret, then or now. The Shinohara #6 is compatible with BOTH "old"
NMRA and NASG ("new" NMRA) standards. I know, because that's the way I
designed it.
Moot point now, but at the time it wasn't
Bob Nicholson
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/S-Scale/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/S-Scale/join
(Yahoo! ID required)
<*> To change settings via email:
mailto:[EMAIL PROTECTED]
mailto:[EMAIL PROTECTED]
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
