--- In [email protected], JGG KahnSr <jacek...@...> wrote:
> On a solid end sill or beam, one can simply drill a shallow dimple >in the
> material. For a raised one, solder a bit of brass tubing to a >bit of sheet
> brass and file it down; the solder will give a fillet to >represent the
> rounded pocket.
>
The preformed wire jeweler's jump rings would probably work too,they come in
various sizes....dave
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/S-Scale/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/S-Scale/join
(Yahoo! ID required)
<*> To change settings via email:
[email protected]
[email protected]
<*> To unsubscribe from this group, send an email to:
[email protected]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
