--- In [email protected], "shabbona_rr" <user141...@...> wrote:
>
> The photos look good to me, John. I'm curious, though, about the dimension
> across the flats on the AM 395 motor. Does it fit in the AM GP-9 shell OK?
>
> I just put a Sagami 2236 in my GP-9, but it still seems a little small
>
> Bob Nicholson ______________________________________
>
====================================================================
Thank you Bob. The fit of the 396 motor is better than the original which
caused the shell to bow. The 395 is a perfect fit. I would estimate the 395
fitting with about 1/32" or less clearance on each side.
When I was an HO modeler, I thought NWSL imported the best motors which were
Sagami. However, I am no longer sure that Sagami's are the best option for my
S scale applications (bang for the buck if you get my drift), and was very
excited to learn about this inexpensive option from AM. The 395 responds very
well to DCC and I am sure even better with string. <VBG>
~ John
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/S-Scale/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/S-Scale/join
(Yahoo! ID required)
<*> To change settings via email:
[email protected]
[email protected]
<*> To unsubscribe from this group, send an email to:
[email protected]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
