I stand to be corrected but I have been told that Paper Creek is gone.
I'm not sure why however.
On a similar manner, what would be the best way to join the corners?
With a typical wooden sections one cut miter the corners. When it came
to thin paper sides, I've tried to wrap the corners with less than
desirable results.
Bob Werre
BobWphoto.com
> Hi Howard:
>
>
> If it's the latter, I think you should re examine the visual quality
> of printed
> paper bricks. Paper Creek makes brick sheets that look 3-D from very
> close
> viewing distances. A friend of mine used Paper Creek brick to try to
> simulate
> Insulbrick. He though the product would give him the 2-D look he
> wanted, but
> instead his structure ended up looking like the real stuff.
>
> Jim
>
> Hi Gents
>
> I am considering what the next project would have for standard brick
> sizes. I
> would like to know what you think would be the best actual size of
> laser cuts
> that would best suit for bricks on walls, chimneys and so forth. I am
> afraid
> that the fine lines for using scale 3.5 inch by 8 inch groves may be
> to close
> for finishing with paints and such.
>
> Thoughts??
>
> Howard Sheffield
>
> [Non-text portions of this message have been removed]
>
>
[Non-text portions of this message have been removed]
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/S-Scale/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/S-Scale/join
(Yahoo! ID required)
<*> To change settings via email:
[email protected]
[email protected]
<*> To unsubscribe from this group, send an email to:
[email protected]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
