Howard, For my kits, I use .040" thick styrene strip for the bricks with a .010" strip for the mortar. The mortar depth i use is .010" as well, which is deep, but the finishing technique I recommend for the mortar needs this depth.
Barry Silverthorn Grand River Models somewhere near Toronto --- In [email protected], Howard Sheffield <hjsh...@...> wrote: > > Hi Gents > > I am considering what the next project would have for standard brick sizes. > I would like to know what you think would be the best actual size of laser > cuts that would best suit for bricks on walls, chimneys and so forth. I am > afraid that the fine lines for using scale 3.5 inch by 8 inch groves may be > to close for finishing with paints and such. > > Thoughts?? > > Howard Sheffield > ------------------------------------ Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/S-Scale/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/S-Scale/join (Yahoo! ID required) <*> To change settings via email: [email protected] [email protected] <*> To unsubscribe from this group, send an email to: [email protected] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
