Hi Howard; With laser cutting, you could probably stagger cut the ends like real bricks to interlock.
Pieter E. Roos --- On Fri, 1/7/11, Howard Sheffield <[email protected]> wrote: > Hi Bob > > The mitering of the corners was the most difficult part of > the job. I had to set up a jig to help do this as I > was doing several houses to sell to customers. I used > a bench power sander to start the angle and finished by hand > with a block sander. The corners join very nicely when > none and the design shows proper brick alignment. > There must be an easier way so maybe someone out there will > tell us what it is. > > Howard ------------------------------------ Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/S-Scale/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/S-Scale/join (Yahoo! ID required) <*> To change settings via email: [email protected] [email protected] <*> To unsubscribe from this group, send an email to: [email protected] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
