Re: Rear Handrails... When we got the engineering sample engine,
these fell off so in the evaluation it was noted and we asked that one
end be attached know that these need to be removed when the hood/cab
assy was taken off of the chassis. But, when they showed up, it was
obvious to us that they ACCed both ends of the handrail. We removed
them by using a small flat blade screwdriver and scaring off the
excess glue from the bottom of the chassis, then pushing hard on the
end inserted in the chassis in hopes of pushing it out. Most of the
time, we were able to do this. But, we do have some extra rear
handrails so these can be replaced.
Don
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/S-Scale/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/S-Scale/join
(Yahoo! ID required)
<*> To change settings via email:
[email protected]
[email protected]
<*> To unsubscribe from this group, send an email to:
[email protected]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
