George, I mounted the speaker in the 'traditional' place facing down in
the tender. I used either a speaker from Litchfield station or one from
Railmaster--I bought from both companies close to each other.
With my Pacific I was able to put the decoder in the engine, which cuts
down somewhat with the number of wires between tender/engine--always a
good thing! I used some double sided foam tape and fastened it on top
of the gearbox. My Mikado didn't have that kind of room without doing a
bunch of brass surgery!
Good luck.
Bob
On 3/17/11 11:51 AM, gsc3 wrote:
>
> Thanks, Bob. Probably a couple months away but I've got a USRA Pacific
> I need to put a decoder in so this is helpful. Curious, where did you
> put the speaker?
>
> George Courtney
>
[Non-text portions of this message have been removed]
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/S-Scale/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/S-Scale/join
(Yahoo! ID required)
<*> To change settings via email:
[email protected]
[email protected]
<*> To unsubscribe from this group, send an email to:
[email protected]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
