Dear Jace, Currently we do not offer the wheelsets or bolsters in our available product line. However with that being said..... We have done a special request on a time or two. The wheelsets which were blackened without bolsters we sold for $8.25 per pair. The bolsters would be additional....no price for those established...but I would think in the $2.00 range per pair. I still haven't had chance to see how many sets we do have available.
Hope this helps. regards, Greg Berndtson Iron Rail Models LLC Mar 18, 2011 11:28:02 PM, [email protected] wrote: =========================================== Dear Greg While price should never be the sole criterion in deciding what to buy, it would be helpful if I knew what you were charging for current production Ace trucks, both with plastic wheels and with metal ones. Also what you want for conversion bolsters (at this point mostly the 2012 hopper ones). Jace Kahn General Manager Ceres & Canisteo RR Co./Champlain County Traction Co. > To: [email protected] > From: [email protected] > Date: Thu, 10 Mar 2011 07:48:20 -0600 > Subject: Re: RE: {S-Scale List} Ace #2012 Bolsters > > Jace, > All the current production wheelsets and trucks for the tank cars we are > doing use the delrin bushings. Our sideframes are blackened and sprung. If > you are using scale wheels we have 33" plastic code 110 tread width. We can > make up 33" blackened brass code 110 sets as well. If this is of interest, > please let me know and I can do a price quote to you for some sets. > Regards, > Greg Berndtson > Iron Rail Models LLC > > > Mar 9, 2011 10:21:00 AM, [email protected] wrote: > > =========================================== > > > > > > > > > > > > > > > > > > > > > > > > > > > > > I could use perhaps 5-6 (as noted, I am hoping I am getting near the end of > AF conversions), depending on > > what you need to get for them. I'd also be interested in finding out what > you are asking for the Ace sprung > > trucks; right now I have a few extra, but they may run out before I find more > at a show. > > Are you using the nylon bushings rather than the earlier brass ones? I > notice a couple of the kits I've obtained > > seem to have gone to them, along with a thinner wheel profile and washers to > space them--presumably later > > production. > > > > Jace Kahn > > > > General Manager > > Ceres & Canisteo RR Co./Champlain County Traction Co. > > > > > To: [email protected] > > > From: [email protected] > > > Date: Wed, 9 Mar 2011 06:50:43 -0600 > > > Subject: Re: RE: {S-Scale List} Ace #2012 Bolsters > > > > > > Jace, > > > Please advise the number of sets you need. > > > Greg Berndtson > > > Iron Rail Models LLC > > > > > > > > > Mar 8, 2011 07:27:43 PM, [email protected] wrote: > > > > > > =========================================== > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Yes, I buy Ace bolsters and Ace sprung trucks when I find them at > > shows--the problem is that there are few shows within decent driving > > distance which > > > > > > have any substantial S scale. > > > > > > > > > > > > Jace Kahn > > > > > > > > > > > > General Manager > > > > > > Ceres & Canisteo RR Co./Champlain County Traction Co. > > > > > > > > > > > > > To: [email protected] > > > > > > > From: [email protected] > > > > > > > Date: Tue, 8 Mar 2011 19:22:03 -0600 > > > > > > > Subject: Re: {S-Scale List} Ace #2012 Bolsters > > > > > > > > > > > > > > Jace, > > > > > > > As the new owner of the former Down's/MMT company's products, I may be > > > able to assist you. I've come across a small number of the bolsters you > > > are seeking. They can bee used with our sprung friction bearing trucks > > > which can also be made up with them and sold. Please advise if this is > > > of interest to you. > > > > > > > Regards, > > > > > > > Greg Berndtson > > > > > > > Iron Rail Models LLC > > > > > > > > > > > > > > > > > > > > > Mar 7, 2011 02:39:27 PM, [email protected] wrote: > > > > > > > > > > > > > > =========================================== > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > If anyone, dealer or just the average, run-of-the-mill packrat, has extra > > > #2012 bolsters (AF hopper conversion) that are gathering dust > > > > > > > > > > > > > > and cobwebs, I can use 5-6 pair. > > > > > > > > > > > > > > And then I hope to stop doing AF conversions... > > > > > > > > > > > > > > > > > > > > > > > > > > > > Jace Kahn > > > > > > > > > > > > > > > > > > > > > > > > > > > > General Manager > > > > > > > > > > > > > > Ceres & Canisteo RR Co./Champlain County Traction Co. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > [Non-text portions of this message have been removed] > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > ------------------------------------ > > > > > > > > > > > > > > Yahoo! Groups Links > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > [Non-text portions of this message have been removed] > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > ------------------------------------ > > > > > > Yahoo! Groups Links > > > > > > > > > > > > > > > [Non-text portions of this message have been removed] > > > > > > > > > > > > > > > > > > > > > ------------------------------------ > > Yahoo! Groups Links > > > [Non-text portions of this message have been removed] ------------------------------------ Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/S-Scale/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/S-Scale/join (Yahoo! ID required) <*> To change settings via email: [email protected] [email protected] <*> To unsubscribe from this group, send an email to: [email protected] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
