--- In [email protected], tandocrr@... wrote:
>
> I was working on a PRS AAR boxcar kit this evening, and was having problems
> attaching the brake shoes to the supplied trucks. The trucks are the PRS
> National Type B-1 freight trucks. The pegs in the shoes were the same
> distance apart as the holes in the truck sideframe, but they wouldn't fit.
> Do the holes need to be reamed out or should the pegs be tapered?
>
======================================================
Mark:
They are PIA, but they are a press fit and once attached they stay on!
I use the very thin nosed needle nosed pliers (my are Xuron brand) to "roll"
them in place - there is a minimal amount of flex in the truck you can use to
muscle them into place.
I am looking forward to reading about how you "wowed" those HO heathens in your
NMRA division minutes. <VBG>
John Gibson
Rocklin, CA
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/S-Scale/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/S-Scale/join
(Yahoo! ID required)
<*> To change settings via email:
[email protected]
[email protected]
<*> To unsubscribe from this group, send an email to:
[email protected]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
