The mounting screw holes have to be reamed out with a 2-56 clearance drill for mounting with a 2-56 screw.
Bob Nicholson ______________________________________ --- In [email protected], "raisinone" <raisinone@...> wrote: > > Check it out... > > http://www.walthers.com/exec/productinfo/920-6000 > > Mounting holes aren't perfect. It can take a bit of finesse, not all that > much of a challenge for an S scale modeler. Especially if I can do it. > > Jim Kindraka > > > --- In [email protected], "ctxmf74" <ctxm@> wrote: > > > > Some questions for those who've tried these couplers; > > Will they fit in KD boxes or do they require their own draft gear? Is > > draft gear included? does it use KD mounting hole spacing? > > Thanks for any insight .........dave > > > ------------------------------------ Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/S-Scale/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/S-Scale/join (Yahoo! ID required) <*> To change settings via email: [email protected] [email protected] <*> To unsubscribe from this group, send an email to: [email protected] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
