This surely would depend on the model, and whether or not the model had details hanging below the side sill leven on the ends. I know that if these are not removed, the AF type, gaugy-godzilla couplers will bump into these details as it swings.
But just out of curiosity, how tight are the curve radii on your layout? If they are not wide enough, the underframes MUST be cut to prevent the wheel flanges from hitting the frame! I know this to be true from experience in both HO and S. John Degnan [email protected] ----- Original Message ----- From: Alan Lambert To: [email protected] Sent: Wednesday, April 13, 2011 09:03 PM Subject: Re: {S-Scale List} Forward vs. Backward Compatibility From: Alan Lambert Richard, As I stated in earlier post , all that is needed is the bolsterplate end off of a S-Helper knuckle coupler which they include with their cars.It will not interfere with underbody detail. I know. thanks, Alan [Non-text portions of this message have been removed] ------------------------------------ Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/S-Scale/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/S-Scale/join (Yahoo! ID required) <*> To change settings via email: [email protected] [email protected] <*> To unsubscribe from this group, send an email to: [email protected] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
