Good morning,
My FNF was spent casting resin coal loads (24 of them) for my unit coal porter
train. If you have never done any resin casting I would highly reccomend
trying it. This stuff is model railroad in a bottle! I made a master,
produced the mold (about 15 minutes), and started casting away(about 10 minutes
for each load start to finish). I have found that I can get about 10 loads
cast out of 32 ounces of 2 part resin. Micro-Mark sells a colorable resin so
the loads are already colored black and with some spray adhesive and a little
dunk in the coal they look really good!
Danny Click
[Non-text portions of this message have been removed]
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/S-Scale/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/S-Scale/join
(Yahoo! ID required)
<*> To change settings via email:
[email protected]
[email protected]
<*> To unsubscribe from this group, send an email to:
[email protected]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
