That is exactly what I was going to do... I also have an oversized “Brite
Boy” that I was going to use on a second car.
Thanks!
Bill
I used a piece of masonite (rough side down) epoxied to two roofing nails
which then float in two holes in the floor of a boxcar (AF X29 with metal
Ace floor) this just glides along and wipes the rail. Once dirty a quick
touch up with sandpaper and its good to go again. I made it about tie width
and tapered the ends to avoid snagging on switch points.
Bud Rindfleisch
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/S-Scale/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/S-Scale/join
(Yahoo! ID required)
<*> To change settings via email:
[email protected]
[email protected]
<*> To unsubscribe from this group, send an email to:
[email protected]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
