> 2. If you are using bulbs, then it is prudent to get the actual voltage
> measurements <snip>
> John "turn out the lights" Gibson
Thorin....
John's advice is very good, but......
if you intend to run your locos on several different layouts, each with
differing track voltages, it might be worthwhile to add a small regulator
between the decoder and the bulbs or LEDs. Then the track voltage will not
matter since the regulator will hold the voltage at a set level.
Cheers.....Ed L.
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/S-Scale/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/S-Scale/join
(Yahoo! ID required)
<*> To change settings via email:
[email protected]
[email protected]
<*> To unsubscribe from this group, send an email to:
[email protected]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
