--- In [email protected], Jonathan Hatfield <jonathan@...> wrote:
>
> Can someone please tell me what the TRUE code is for the SHS flex track? IF
> it is code 131, could it be used with turnouts built from code 125?
>
I don't know what code it is but if it is code 131 it definitely could be used
with code 125 switches. As long as the top inside surface of the rails aligns
all will be fine. I make compromise rail joiners for these type of situations
by sliding them onto short pieces of the two sizes of rail then turning the
assembly top down on an anvil surface and hammering the rail bottom of the
smaller rail till the joiner distorts and the tops become aligned.A little
slack in the joiners don't matter as the alignment can be fined up when
soldering....Dave Branum
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/S-Scale/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/S-Scale/join
(Yahoo! ID required)
<*> To change settings via email:
[email protected]
[email protected]
<*> To unsubscribe from this group, send an email to:
[email protected]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
