I just remeasured the pieces I have and they are definitely code 131. Inside the web of the ties reads. Made in China.....for S Trak Systems.....S Helper Service...
Butch --- In [email protected], "ctxmf74" <ctxm@...> wrote: > > > > --- In [email protected], Jonathan Hatfield <jonathan@> wrote: > > > > Can someone please tell me what the TRUE code is for the SHS flex track? > > IF it is code 131, could it be used with turnouts built from code 125? > > > > I don't know what code it is but if it is code 131 it definitely could be > used with code 125 switches. As long as the top inside surface of the rails > aligns all will be fine. I make compromise rail joiners for these type of > situations by sliding them onto short pieces of the two sizes of rail then > turning the assembly top down on an anvil surface and hammering the rail > bottom of the smaller rail till the joiner distorts and the tops become > aligned.A little slack in the joiners don't matter as the alignment can be > fined up when soldering....Dave Branum > ------------------------------------ Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/S-Scale/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/S-Scale/join (Yahoo! ID required) <*> To change settings via email: [email protected] [email protected] <*> To unsubscribe from this group, send an email to: [email protected] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
