Lee, If we don't get these Sugar Beet gons soon, I'm going to opt for the narrow gauge Sugar Cane flats like they used in Hawaii, and still use in Cuba. Bill --- On Mon, 10/3/11, Lee Johnson <[email protected]> wrote:
From: Lee Johnson <[email protected]> Subject: Re: {S-Scale List} 2011 convention cars? To: [email protected] Date: Monday, October 3, 2011, 12:12 AM Bud (and all you other patient people), We did finally receive test shots of the large parts (car sides and ends, extension sides and ends, floor bottom, inner floor, and under frame) cast in resin. The parts looked very nice, except rivet detail was basically missing on all parts, board separations in the car sides was not uniform (some board separations were deeper than others), and board separations on the extension sides and ends were too deep. Our supplier was informed of the above reasons for not approving these test shots near the end of July 2011. As of the middle of last week, I have been informed by the supplier that they are in the process of sending castings to their prototyper to address these problems. This is the process where the patterns will be reviewed for modification or new patterns being made to resolve the problems. The patterns are used to make the molds from which the castings are made. There have been too many missed promise dates with this project that we won't even speculate on actual delivery of the cars. We are taking this project now one step at a time. The next step is to receive a corrected set of test shots for our approval. When we receive this set of test shots, I will post it so everyone is aware of the progress. We want to thank everyone your support and for hanging in there with us. This project has been far more frustrating for us than we had anticipated, but we feel the end product will be a very nice addition to products available to S scale. Lee Johnson On Oct 1, 2011, at 8:03 AM, Bud Rindfleisch wrote: > Hi folks, > I know many are still awaiting the 2010 Duluth convention cars, but I am > wondering what the current status is of the Sacto 2011 SP gons? Ed L? any > update? > Thanks > Bud Rindfleisch > > [Non-text portions of this message have been removed] ------------------------------------ Yahoo! Groups Links [Non-text portions of this message have been removed] ------------------------------------ Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/S-Scale/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/S-Scale/join (Yahoo! ID required) <*> To change settings via email: [email protected] [email protected] <*> To unsubscribe from this group, send an email to: [email protected] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
