Bill.....If'n you are going to superdetail the interior of the gondola (which
sounds like a lot of work), you might as well also apply the correct lettering
to the containers themselves. Container lettering is clearly visible above the
sides of the gondolas. Don't forget: each container had a unique serial
number. Have fun....Ed L.
> The bottom has what looks to be 8x12 inch timbers set on edge and fastened
> with all kinds of steel hardware â" plates, angles and tees. There are 6
> spaces for containers at each end, and the leftover space in the center has
> two longitudinal timbers sandwiched between the end sets to keep them from
> moving.
> This happened to be a Western Maryland car in the photo, but I will use that
> setup for a SLE&P container gon.
> Bill Winans
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/S-Scale/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/S-Scale/join
(Yahoo! ID required)
<*> To change settings via email:
[email protected]
[email protected]
<*> To unsubscribe from this group, send an email to:
[email protected]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
