Dear Rance, We had to special order nut drivers for the 2-8-0. They are 1.6mm and impossible to find in the US. We still have some if that will work, but I suspect they might be a bit larger. Don
On Jan 24, 2012, at 11:05 AM, Rance Velapoldi wrote: > Hi all: > One of the hex headed machine screws that holds the side/drive rods on > my AM 4-8-4 came loose. I looked for some nut drivers that I thought I > had, but couldn't find them at home (typical). I checked with Micro > Mark and they have a few sets sets, in metric and inch. Has anybody > used either of those and which would be better for the engine side > rods? I assume that the metric would be best since the engines are made > in China - however, maybe the manufacturers (AM, SHS, etc.) might make a > suggestion. Does anyone have any other suggestions besides MicroMark > where I can order them and have them sent to California??? > Thanks in advance for any advice. > Rance Velapoldi (Tranby, Norway) > ps Any suggestions for a loc tite material to hold machine screws in? > Might as well order both together. >
