Frequently you can go to a good hardware store and buy a socket head cap
(allen) screw with a socket size that will correspond to the nut you need a
wrench for. For metric sizes use metric screws. Once you have the right size
allen bolt you can then chuck it into a pin-vise or file handle, or make your
own handle by drilling a dowel and threading/epoxying the threaded end of the
screw into the dowel. I didn't think of this trick myself, some of the siderod
wrenches included with Rivarossi HO scale steam locos were made this way.
Bill in FL
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/S-Scale/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/S-Scale/join
(Yahoo! ID required)
<*> To change settings via email:
[email protected]
[email protected]
<*> To unsubscribe from this group, send an email to:
[email protected]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
