Got it thanks So do you think the pilot could be set stationary, drilled out in the clear and just allow the truck to pivot on the same location?
gale ----- Original Message ----- From: [email protected] To: [email protected] Sent: Sunday, January 29, 2012 3:56 PM Subject: Re: {S-Scale List} Re: Amherst show [1 Attachment] [Attachment(s) from [email protected] included below] > I have an SP unit coming, but for a couple months now I have been asking this and never had an answer.... Do the trucks pivot any at all in those swing pilots.. They swing together. I've attached a photo of the truck assembly. I haven't had anything apart yet, but it appears that 2 screws hold the pilot to the truck. If you frame-mount the pilot, you will need a spacer to fill the vertical gap and maintain the step spacing. It looks like the mounting ears on the front of the truck might need to be trimmed for clearance. Stan Stokrocki
