I just posted a couple of pics of my Bowser 24" tt to the Photos folder under Arden.
I bought it about 20 years ago. Just stuck it in my benchwork a couple months ago. It was supposed to be ready for the July tour but my health did not allow that or many other things. The only choice was the diameter which is just enough for a Big Boy in S. The pit is a little deep (O scale) but I filled it with a 1/2" white foam which you might be able to see. Then I am going to taper fill it up to the top of the ring rail. My depth of girder will be 1-1/4". A 96' would be 3/4 of that. One inch would look good to me. Arden Goehring, Lodi CA --- In [email protected], "jshannon148" <jshannon148@...> wrote: > > The replies have been overwhelming both in terms of number and information. > Many thanks to all who responded with ideas and web sites. ------------------------------------ Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/S-Scale/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/S-Scale/join (Yahoo! ID required) <*> To change settings via email: [email protected] [email protected] <*> To unsubscribe from this group, send an email to: [email protected] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
