In my typical overkill fashion, I made a drilling template using my NWSL Riveter to emboss rivets in a piece of brass, then drilling through the rivet impressions from the back. The point of using the Riveter was to get the spacing precise.
-Michael Eldridge --- In [email protected], JGG KahnSr <jacekahn@...> wrote: > I think you mean dividers. I still think it is worth fabricating a simple > jig from styrene if one is going to install them on several cars. > > I don't recall > exactly how I drilled out for the ladders, it was a time ago. ------------------------------------ Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/S-Scale/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/S-Scale/join (Yahoo! ID required) <*> To change settings via email: [email protected] [email protected] <*> To unsubscribe from this group, send an email to: [email protected] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
