Surely it's a simple matter to construct additions for increased capacity. Much simpler than trying to make it smaller.
Ed Kozlowsky Sanford, Maine www.SScale.org >________________________________ >From: JGG KahnSr <[email protected]> >To: [email protected] >Sent: Saturday, March 31, 2012 8:46 AM >Subject: {S-Scale List} Beemer and Green Feed Mill > > > >I'm afraid selective compression is a serious problem for me; much of the >attraction for the structure all these years, other >than that it is a local structure from where I grew up, is that it is >simultaneously a decent-sized structure yet not massive, >a smallish mill as prototypes go but large enough to look right with a couple >of boxcars parked next to it. I'll need to dig out >my photocopies of the drawings to check, but I did have a nagging feeling when >I looked at the scans of the pilot model that >something wasn't right. > >Jace Kahn >General Manager >Ceres & Canisteo RR Co./Champlain County Traction Co. > > > > >I have verified these footprint dimensions and they are correct. Yes, some >selective compression has been applied. > > >Ed Sauers > > > >________________________________ >From: Edward Sauers <[email protected]> >To: "[email protected]" <[email protected]> >Sent: Tuesday, March 27, 2012 1:33 PM >Subject: {S-Scale List} UPDATE *** Another Possibility from Altoona Model Works > > > >Group, > >The foot print info for the Reamer and Green Mill is 4.125" wide x 11.625" >long > > > >Ed Sauers > > > > >I have attached some photos (pilot model) of another offering from Altoona >Model Works, this is a model of the Reamer & Green Mill that is located in >LeRoy NY. The estimated price is $175 plus shipping. This is a very complex >building as you will see when viewing the pricture. Remember, if purchased >through me, you will receive a 10% discount off the retail price. We need 6 >firm orders to make this kit a go in S-Scale but since I am buying one and I >know of one other S-Scale Modeler that's interested we really on need 4 more >firm orders. Please contact me at [email protected] if interested. > >Ed Sauers > > > > > > > > >
