--- In [email protected], JGG KahnSr <jacekahn@...> wrote:
>
>
> I'm afraid selective compression is a serious problem for me; much of the
> attraction for the structure all these years, otherthan that it is a local
> structure from where I grew up, is that it is simultaneously a decent-sized
> structure yet not massive,a smallish mill as prototypes go but large enough
> to look right with a couple of boxcars parked next to it. I'll need to dig
> outmy photocopies of the drawings to check, but I did have a nagging feeling
> when I looked at the scans of the pilot model thatsomething wasn't right.
>
> Jace Kahn
>
>
> Jace, I supplied the plans from MR and took the photos of the mill last
> Fall for Altoona Model Works through Ed Sauers. At first I too was opposed to
> any selective compression but after seeing the pilot of the O scale model, it
> looks fine to me. Also I can confirm that the sign on the building says
> "Reamer" & Green not Beamer as MR had it.
Bud Rindfleisch
>
>
>
>
>
>
>
>
>
>
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/S-Scale/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/S-Scale/join
(Yahoo! ID required)
<*> To change settings via email:
[email protected]
[email protected]
<*> To unsubscribe from this group, send an email to:
[email protected]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
