--- In [email protected], "Bill Lane" <bill@...> wrote:
> I use phosphor bronze wire at all times for making cut levers. Making them
> from brass wire really is a waste especially if you solder them on.. They
> will not hold up until you get the car decaled and completed. The brass wire
> gets very soft at the solder joint.
>
I'm not sure what it's made of but I've had good luck making cut levers from
the wire that details associates sells in hobby shop rack packs. It comes in
many sizes both round and various flats and solders well. I use the same stuff
in a larger size to make my airhoses, form the hose and brake line then bend a
90 degree tail to melt or drill into the car floor and they'll never come off
no matter how hard you handle the car :>) ...DaveBranum
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/S-Scale/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/S-Scale/join
(Yahoo! ID required)
<*> To change settings via email:
[email protected]
[email protected]
<*> To unsubscribe from this group, send an email to:
[email protected]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
