--- In [email protected], Scaler164@... wrote:
> I like detail parts that have longer-than-usual 'mounting pegs' that are long
> enough to pass completely through the model's shell and stick out a little on
> the inside so that all the gluing (or soldering) Â can be done on the inside,
> out of sight, without needing to worry about the paint or having to be overly
> careful about how much glue (or solder) Â is used.
>
Whenever possible I make my own detail parts from brass wire with long
enough pins to allow me to melt them in with a soldering iron. No glue usually
needed but a drop of thin ca can be added if the part ever works loose. I try
to get the pins in so far that the parts will bend if hit and can just be
straightened instead of searched for on the floor :>) .....DaveBranum
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/S-Scale/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/S-Scale/join
(Yahoo! ID required)
<*> To change settings via email:
[email protected]
[email protected]
<*> To unsubscribe from this group, send an email to:
[email protected]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
