--- In [email protected], Bob Werre <bob@...> wrote:
>
> While the topic of stock cars has been approached...Don, have you found
> a safe way to remove the roof of your stock cars?
>
> Bob, I have safely removed a few of the SHS reefer roofs to install a resin
> roof once offered by our own Pieter Roos (Roos' roofs?) using two #18 wide
> chisel blades by Xacto. Carefully work the sharp edge into the edge of the
> roof and car side and then move the blade up and down slightly until you hear
> a snap, crackle or pop (hey they were made in the land of Rice!)Once loose,
> pry gently a little at a time until you have a bit of a gap then start the
> second blade in and do the same, but now twist the first blade, gently at all
> times. Work around the perimeter until it comes off. Has worked for me on
> three cars so far. Good luck. hardest part is getting up the nerve to attempt
> it. Mine were spot glued with some version of acc I think.
Bud Rindfleisch
>
>
>
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/S-Scale/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/S-Scale/join
(Yahoo! ID required)
<*> To change settings via email:
[email protected]
[email protected]
<*> To unsubscribe from this group, send an email to:
[email protected]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
