Yes. The Rail-Lynx chip is now plugged into the chassis plug. It works just
fine.
--- In [email protected], Don Thompson <don@...> wrote:
>
> Dear Ed,
> Did you remove the AC/DC pcb?
> Don
>
> On Sep 4, 2012, at 6:42 PM, somothrguy2003 wrote:
>
> >
> > Hello Don,
> >
> > I'm trying to retrofit a Rail-Lynx DCC encoder into an SHS SW1 but can't
> > fit the chip inside the hood due to the electronics board mounted inside.
> > The fit of the shell onto the chassis is too tight with the new chip in
> > place. Since I don't need to plug this upper electronics board into the
> > lower chassis, is it possible to remove the upper board without disturbing
> > the connection to the front (or rear) headlight? How would I remove it if
> > it is possible to do so?
> >
> > Thanks in advance for the due diligence.
> >
> > Ed Kenny
> > (Someday)modeling the DL&W circa 9/29/54 in S scale
> >
> >
>
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/S-Scale/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/S-Scale/join
(Yahoo! ID required)
<*> To change settings via email:
[email protected]
[email protected]
<*> To unsubscribe from this group, send an email to:
[email protected]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
