Photos of CG cars attached... They're brass (with wood interiors), I love 'em, along with my PRR 65' mill gon. Not sure what resin you are referring to but it most likely will be more expensive than brass as it has not been discovered yet!! <GRIN>
Jim Kindraka Plymouth, WI http://groups.yahoo.com/group/S-Scale/photos/album/1226119013/pic/1198935893/view?picmode=&mode=tn&order=ordinal&start=1&count=20&dir=asc http://groups.yahoo.com/group/S-Scale/photos/album/1226119013/pic/1198935893/view?picmode=&mode=tn&order=ordinal&start=1&count=20&dir=asc --- In [email protected], "John Degnan" <Scaler164@...> wrote: > > Is that the CG model or the other? > > I could actually use a variant of the 65' 6" Mill Gon... to represent a SAL > 6500 series prototype. I think I may pick that as one of my next cars to > promote. > > Reference : http://www.athearn.com/Products/Default.aspx?ProdID=ATH76509 > (model has wrong ends) > > I'd probably get about three of these if they were done... in eurethane. :) > Maybe one if they were done in brass. > > > John Degnan ------------------------------------ Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/S-Scale/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/S-Scale/join (Yahoo! ID required) <*> To change settings via email: [email protected] [email protected] <*> To unsubscribe from this group, send an email to: [email protected] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
