According to the NWSL online catalog: American Models Diesel upgrade geared wheelsets (4) 2534-6 $32.95 S 40"/88 wheels, Blunt 3/32" x 1.015" axle 2535-6 OOS S 40"/110 wheels, Blunt 3/32" x 1.015" axle
American Models Diesel (Circa 2002+) geared wheelsets 2688-6 $32.95 S 40"/88 wheels, Blunt 3/32" x 1.015" axle (4) 2689-6 OOS S 40"/110 wheels, Blunt 3/32" x 1.015" axle (4) 2690-6 $42.95 S 40"/88 wheels, Blunt 3/32" x 1.015" axle (6) 2691-6 OOS S 40"/110 wheels, Blunt 3/32" x 1.015" axle (6) 2316-6 $9.95 Gear: 48DP x 20T SGd x .120" face x 3/32" bore (1) Several sets are currently listed as OOS but they expect to replenish supply. I ordered set 2688-9 and will report findings upon arrival. Thanks, Matt Hogan --- In [email protected], David Engle <rirocket@...> wrote: > > What are the NWSL geared wheelset stock numbers for the variations involved. > The NWSL list I have says only before or after 2003, the set of I got a few > months ago has flat interface surfaces, while the mating surfaces in the > truck block are concave surfaces. > > Dave Engle > > --- On Mon, 4/8/13, pickycat95 <pickycat95@...> wrote: > > > From: pickycat95 <pickycat95@...> > Subject: Re: {S-Scale List} AM S12 Repower Project - Cracked Axle Gears > To: [email protected] > Date: Monday, April 8, 2013, 9:27 AM > > > >  > > > > Last spring I purchased a pair of SD60 demonstrator schemes at a model RR > show. One of the units didn't run very well. When I took it apart one of the > axles had a cracked gear. It didn't matter so much because I had to replace > the wheels anyway because they were highrail. Rather than order from AM and > get .125 code wheels I decided to order from NWSL. > > Still I wondered whether this was a one-off problem or something more > systemic. I've had issues with AM universal joint sockets cracking on the > motor and other shafts in the power train. > Ben Trousdale > > --- In [email protected], "Matt" <nsrc119@> wrote: > > > > Dave, > > At this point, I'm considering dumping the entire mess on eBay and going > > back to HO or O scale...or wait to see what MTH and Lionel offer for an S > > scale switcher...or purchase a SHS loco via eBay...or take up another hobby. > > > > Most likely I'll send the wheelsets back to Ron at American Models. No > > sense torturing Dave at NWSL with this nonsense. > > > > Matt Hogan > > > > --- In [email protected], David Engle <rirocket@> wrote: > > > > > > R U contacting Mr. Bashista, or NWSL? > > > > > > Dave Engle > > > > > > --- On Mon, 4/8/13, North Stratford <nsrc119@> wrote: > > > > > > > > > From: North Stratford <nsrc119@> > > > Subject: {S-Scale List} AM S12 Repower Project - Cracked Axle Gears > > > To: [email protected] > > > Date: Monday, April 8, 2013, 7:09 AM > > > > > > > > > > > > à> > > > > > > > > > > > Group, > > > All the axle gears on my AM Baldwin S12 loco are cracked. The attached > > > photo shows to two worst. > > > Matt Hogan > > > > > > ------------------------------------ Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/S-Scale/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/S-Scale/join (Yahoo! ID required) <*> To change settings via email: [email protected] [email protected] <*> To unsubscribe from this group, send an email to: [email protected] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
