I recently installed one in an AM SD60 with AM's LED lamps front and back. I
had to modify a CV because the motor was wired backwards. It seemed the
headlight function changed with it. So I then had to reverse that by modifying
another CV. The front headlight is always on whether going forward, backwards
or stationary and irregardless of how function 0 is set. I then tried to
program 'rule 17' (?) in CV49 where the front headlight dims when reversing. I
also programmed in the LED dimming feature. All that didn't work so I messed
around some more and programmed the front headlight to flash. Well the rear
headlight flashed and now I think that the decoder thinks the front is the
rear. I then tried to program the rear light CV(50) so that it would dim.
That didn't work nor could I get it to flash.
Maybe I have to go back to square one, reset the factory defaults and reverse
the motor wiring.
Ben Trousdale
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/S-Scale/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/S-Scale/join
(Yahoo! ID required)
<*> To change settings via email:
[email protected]
[email protected]
<*> To unsubscribe from this group, send an email to:
[email protected]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
