In my manual for Soundtraxx, it says that putting a value of 3 in CV 29 will give you reverse direction and 28/128 speedsteps. I run two F-3's as a pair with one unit reversed. Been over a year since it was programmed however.
George Courtney --- In [email protected], "Roger Nulton" <roger.nulton@...> wrote: > > Ben, > > Your square one idea is the best. I belong to the Soundtraxx Yahoo Group and > they are very helpful. I have found Soundtraxx the company to be helpful as > well. > > Roger Nulton > 7 Tsunami installations (:>) > > From: pickycat95 > Sent: Wednesday, April 24, 2013 8:48 AM > To: [email protected] > Subject: {S-Scale List} Tsunami Woes > > > I recently installed one in an AM SD60 with AM's LED lamps front and back. I > had to modify a CV because the motor was wired backwards. It seemed the > headlight function changed with it. So I then had to reverse that by > modifying another CV. The front headlight is always on whether going forward, > backwards or stationary and irregardless of how function 0 is set. I then > tried to program 'rule 17' (?) in CV49 where the front headlight dims when > reversing. I also programmed in the LED dimming feature. All that didn't work > so I messed around some more and programmed the front headlight to flash. > Well the rear headlight flashed and now I think that the decoder thinks the > front is the rear. I then tried to program the rear light CV(50) so that it > would dim. That didn't work nor could I get it to flash. > > Maybe I have to go back to square one, reset the factory defaults and reverse > the motor wiring. > Ben Trousdale > ------------------------------------ Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/S-Scale/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/S-Scale/join (Yahoo! ID required) <*> To change settings via email: [email protected] [email protected] <*> To unsubscribe from this group, send an email to: [email protected] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
