Jean-Pierre Flori wrote:
On Tuesday, June 4, 2013 4:39:56 PM UTC+2, leif wrote:
Volker Braun wrote:
> Your compiler is buggy.
Likely, but since this is conversion.c, and it's an old machine, he may
have just run out of available memory... (Or maybe the process was
ulimited, since it got /killed/.)
Quite possible.
FYI, I was able to build all of Sage 5.10.stg except for Linbox (and the
doc) on a Raspberry Pi with 256 MB of RAM and no swap!
Yes, M4RIE got upgraded in Sage 5.10.beta1 ... B)
I then allocated 512MB of swap and that was sufficient for Linbox(maybe
512 RAM + swap together would have been sufficient), and for the doc.
(The memory consumption of course also depends on the compiler version,
flags, and the platform.)
-leif
(If it's yet another bug in Ubuntu's GCC, we at least haven't seen it
until now, although we have a buildbot for 13.04.)
Jeff, how much RAM do you have, and have you set up swap space? Did
you
use 'ulimit' (see above)?
FWIW, you can always resume the build by typing 'make' again.
-leif
> Try "SAGE_INSTALL_GCC=yes make"
>
> On Tuesday, June 4, 2013 11:45:28 AM UTC+1, Jeff wrote:
>
> Hello,
> I recently tried to make sage 5.9 from source and I got the
error
> below. I am running xubuntu 13.04 on a rather old Dell Dimension
> 4500. I installed all the prerequisites here:
> http://www.sagemath.org/doc/installation/
<http://www.sagemath.org/doc/installation/>
> <http://www.sagemath.org/doc/installation/
<http://www.sagemath.org/doc/installation/>>. Thanks for your help.
>
>
> libtool: compile: gcc -std=gnu99 -DHAVE_CONFIG_H -I. -I./m4rie
> -I/home/jeff/sage-5.9/local/include -I/include -mmmx -msse
-msse2
> -O2 -fPIC -Wall -pedantic -g
-I/home/jeff/sage-5.9/local/include -MT
> trsm.lo -MD -MP -MF .deps/trsm.Tpo -c m4rie/trsm.c -fPIC
-DPIC -o
> .libs/trsm.o
> libtool: compile: gcc -std=gnu99 -DHAVE_CONFIG_H -I. -I./m4rie
> -I/home/jeff/sage-5.9/local/include -I/include -mmmx -msse
-msse2
> -O2 -fPIC -Wall -pedantic -g
-I/home/jeff/sage-5.9/local/include -MT
> trsm.lo -MD -MP -MF .deps/trsm.Tpo -c m4rie/trsm.c -o trsm.o
> >/dev/null 2>&1
> mv -f .deps/trsm.Tpo .deps/trsm.Plo
> /bin/bash ./libtool --tag=CC --mode=compile gcc -std=gnu99
> -DHAVE_CONFIG_H -I. -I./m4rie
> -I/home/jeff/sage-5.9/local/include -I/include -mmmx -msse
> -msse2 -O2 -fPIC -Wall -pedantic -g
> -I/home/jeff/sage-5.9/local/include -MT ple.lo -MD -MP -MF
> .deps/ple.Tpo -c -o ple.lo `test -f 'm4rie/ple.c' || echo
> './'`m4rie/ple.c
> libtool: compile: gcc -std=gnu99 -DHAVE_CONFIG_H -I. -I./m4rie
> -I/home/jeff/sage-5.9/local/include -I/include -mmmx -msse
-msse2
> -O2 -fPIC -Wall -pedantic -g
-I/home/jeff/sage-5.9/local/include -MT
> ple.lo -MD -MP -MF .deps/ple.Tpo -c m4rie/ple.c -fPIC -DPIC -o
> .libs/ple.o
> libtool: compile: gcc -std=gnu99 -DHAVE_CONFIG_H -I. -I./m4rie
> -I/home/jeff/sage-5.9/local/include -I/include -mmmx -msse
-msse2
> -O2 -fPIC -Wall -pedantic -g
-I/home/jeff/sage-5.9/local/include -MT
> ple.lo -MD -MP -MF .deps/ple.Tpo -c m4rie/ple.c -o ple.o
>/dev/null 2>&1
> mv -f .deps/ple.Tpo .deps/ple.Plo
> /bin/bash ./libtool --tag=CC --mode=compile gcc -std=gnu99
> -DHAVE_CONFIG_H -I. -I./m4rie
> -I/home/jeff/sage-5.9/local/include -I/include -mmmx -msse
> -msse2 -O2 -fPIC -Wall -pedantic -g
> -I/home/jeff/sage-5.9/local/include -MT conversion.lo -MD -MP
-MF
> .deps/conversion.Tpo -c -o conversion.lo `test -f
> 'm4rie/conversion.c' || echo './'`m4rie/conversion.c
> libtool: compile: gcc -std=gnu99 -DHAVE_CONFIG_H -I. -I./m4rie
> -I/home/jeff/sage-5.9/local/include -I/include -mmmx -msse
-msse2
> -O2 -fPIC -Wall -pedantic -g
-I/home/jeff/sage-5.9/local/include -MT
> conversion.lo -MD -MP -MF .deps/conversion.Tpo -c
> m4rie/conversion.c -fPIC -DPIC -o .libs/conversion.o
> gcc: internal compiler error: Killed (program cc1)
> Please submit a full bug report,
> with preprocessed source if appropriate.
> See <file:///usr/share/doc/gcc-4.7/README.Bugs> for
instructions.
> make[4]: *** [conversion.lo] Error 1
> make[4]: Leaving directory
> `/home/jeff/sage-5.9/spkg/build/libm4rie-20120613/src'
> make[3]: *** [all-recursive] Error 1
> make[3]: Leaving directory
> `/home/jeff/sage-5.9/spkg/build/libm4rie-20120613/src'
> Error building libm4rie
>
> real 13m10.021s
> user 2m58.068s
> sys 0m14.048s
--
() The ASCII Ribbon Campaign
/\ Help Cure HTML E-Mail
--
You received this message because you are subscribed to the Google Groups
"sage-devel" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To post to this group, send email to [email protected].
Visit this group at http://groups.google.com/group/sage-devel?hl=en.
For more options, visit https://groups.google.com/groups/opt_out.
