#8052: Update prereq to version 0.7 (mostly Fortran issues fixed)
----------------------------+-----------------------------------------------
Reporter: drkirkby | Owner: GeorgSWeber
Type: defect | Status: new
Priority: critical | Milestone: sage-4.3.2
Component: build | Keywords:
Author: David Kirkby | Upstream: N/A
Reviewer: | Merged:
Work_issues: |
----------------------------+-----------------------------------------------
This is a further update to the 'prereq' script. The changes are
* Checks for a Fortran compiler on any platform except OS X. This
addresses #8024 and #8026, which was a duplicate of #8024.
* Prints ''Using the binary Fortran compiler which is included in Sage''
if using the binary included on OS X.
* In the event GNU tools are used, checks gcc, g++ and gfortran are the
same version on all platforms except OS X. If SAGE_FORTRAN is defined as
something non-empty, then the test is performed on OS X too.
* Fully checks there are not a mix of GNU and non-GNU compilers #7021 did
this for C and C++ compilers, but Fortran was excluded, as stated in
#7903. The Fortran compiler is more difficult than C and C++, as gfortran
does not process the -dumpversion option in the same logical way as gcc
and g++. That will be fixed in gcc 4.5.
* Checks that SAGE_FORTRAN_LIB points to a dynamic library which is of
the right type (32 or 64 bit), depending on the setting of SAGE64.
('''This test is only performed on Solaris''' as that is the only platform
where I have sufficient information to do it properly). So trying to make
a 64-bit version of Sage, whilst SAGE_FORTRAN_LIB points to a 32-bit
library, will now be detected. #7021 ensured the file pointed to by
SAGE_FORTRAN_LIB actually existed, but did not check it was a library of
the correct type.
* Corrects a typo, where 'hpux' was used instead of 'HP-UX'.
* Checks that perl is at least version 5.8.0. #7021 ensured perl was
version 5.6.0 or later, but that is too old to build 'R'. The R
documentation states 5.8.0 or later is needed.
* Checks for the header file complex.h, and issues a '''warning''' if
this is not found. It might not be on some older systems. The build does
not exit, as continuing might be helpful for those porting Sage.
* Checks for the library function sqrtl() which will be found on modern
systems, but may not on older systems. A '''warning''' is issued if the
library function does not exist, but the build continues, to aid porting
efforts. (I believe FreeBSD may lack this).
* Copies stdint.h_Solaris9 on Solaris 8 or 9. (Previously this was only
done for Solaris 9). The file stdint.h_Solaris9 is a bit broken, as it
ignores 64-bit specific parts. But for now, it is better than nothing as
it might allow a 32-bit build on Solaris 8 or 9. (I believe gcc 4.5 might
have a better fix, and include the missing header.)
* If the 'configure' script is going to exit with an error, the lines
explaining why are no longer warnings, but just notices (AC_MSG_NOTICE
rather than AC_MSG_WARN is used in configure.ac). It looks a bit better I
think.
== How to install ==
* Download the files prereq-0.7.tar and prereq-0.7-install from
http://boxen.math.washington.edu/home/kirkby/portability/prereq-0.7/
to the directory $SAGE_ROOT/spkg/base There is no need to extract the tar
file - it happens automatically.
* Change the permissions on prereq-0.7-install so they are executable.
== How to test these changes ==
These changes ideally need testing on many systems. Here are some
suggestions, broken into groups of those that should have impacts on all
opperating systems, and those that are operating system specific. In each
case, after installing the prereq-0.7.tar and prereq-0.7-install, run
{{{
$ make distclean
}}}
=== All operating systems except OS X ===
Attempt a build, where there is no Fortran compiler in the path. In
the example below, I temporarily renamed gfortran to something else This
addresses #8024 and #8026, which was a duplicate.
{{{
checking for gfortran... no
checking for g95... no
checking for xlf95... no
checking for f95... no
checking for fort... no
checking for ifort... no
checking for ifc... no
checking for efc... no
checking for pgf95... no
checking for lf95... no
checking for ftn... no
checking for xlf90... no
checking for f90... no
checking for pgf90... no
checking for pghpf... no
checking for epcf90... no
checking for g77... no
checking for xlf... no
checking for f77... no
checking for frt... no
checking for pgf77... no
checking for cf77... no
checking for fort77... no
checking for fl32... no
checking for af77... no
checking whether we are using the GNU Fortran compiler... no
checking whether accepts -g... no
configure: Since Sage 4.3.1 a Fortran compiler is required on all
operating
configure: systems except OS X. A Fortran compiler is included on OS X.
configure: See the file README.txt in the top-level directory.
configure: error: Exiting, since a Fortran compiler was not found.
ERROR: You do not have all of the prerequisites needed
to build Sage from source. See the errors above.
make[1]: *** [installed/prereq-0.7] Error 1
}}}
=== All operating systems ===
* Attempt a build with the first perl version in the path being older
than 5.8.0, and ensure a suitable error message is generated. (Given I
only changed the version string from 5.6.0 to 5.8.0, checking this is
hardly worthwhile, but do so if you are keen).
* Attempt a build where there is a mix of versions of gcc, g++ and
gfortran. An error should be generated.
* Attempt to mix a non-GNU Fortran compiler, with GNU C or C++ compilers.
The following example was tested on Solaris, where SAGE_FORTRAN pointed to
the Sun Fortran compiler, but CC and CXX were unset, so gcc and g++ are
used by default.
{{{
checking whether we are using the GNU Fortran compiler... (cached) no
checking whether /opt/sunstudio12.1/bin/f95 accepts -g... (cached) yes
checking for Fortran flag needed to allow free-form source... -free
configure: Your Fortran compiler accepts free-format source code
configure: which older F77 compilers do not. This does not 100%
configure: guarantee your compiler is suitable for building SAGE
configure: but it probably is.
checking if gcc accepts -dumpversion option... yes
checking gcc version... 4.4.1
checking if g++ accepts -dumpversion option... yes
checking g++ version... 4.4.1
f95: Warning: Option -dumpversion passed to ld, if ld is invoked, ignored
otherwise
Usage: f95 [ options ] files. Use 'f95 -flags' for details
configure: Although gcc and g++ are both version 4.4.1
configure: the Fortran compiler /opt/sunstudio12.1/bin/f95 is some other
version.
configure: The output from /opt/sunstudio12.1/bin/f95 --version is below.
f95: Warning: Option --version passed to ld, if ld is invoked, ignored
otherwise
Usage: f95 [ options ] files. Use 'f95 -flags' for details
configure: Exiting since the Fortran compiler is not the same
configure: error: version as the C and C++ compilers
ERROR: You do not have all of the prerequisites needed
to build Sage from source. See the errors above.
make[1]: *** [installed/prereq-0.7] Error 1
}}}
=== OS X ===
* Attempt a build on a system without a Fortran compiler, ensuring
SAGE_FORTRAN is not defined. There should be a message
{{{
configure: Using the binary Fortran compiler which is
configure: included in Sage.
}}}
* Attempt a build on a system without a Fortran compiler, but set
SAGE_FORTRAN to something like /bin/ls and ensure that the prereq script
tests 'ls' and determines it is not a valid Fortran compiler. You should
see the following message:
{{{
checking whether we are using the GNU Fortran compiler... (cached) no
checking whether /bin/ls accepts -g... (cached) no
checking for Fortran flag needed to allow free-form source... unknown
configure: Your Fortran compiler does not accept free-format source code
configure: which means the compiler is either seriously broken, or
configure: is too old to build Sage.
configure: Note, that on OS X, a Fortran binary is supplied with Sage
configure: so you do not actually need a working Fortran compiler.
configure: You just need to ensure SAGE_FORTRAN is not set to use
configure: the binary Fortran compiler included in Sage. If you set
configure: SAGE_FORTRAN it must point to a working Fortran compiler.
configure: error: Exiting, as the Fortran compiler is not suitable
ERROR: You do not have all of the prerequisites needed
to build Sage from source. See the errors above.
make[1]: *** [installed/prereq-0.7] Error 1
}}}
* Attempt a build on a system with a valid Fortran compiler, setting
SAGE_FORTRAN to that compiler. The compiler should be tested. If the
versions differ from gcc or g++, this should be indicated. I have not
tested this on OS X, as I don't have a system with gfortran installed. But
it should work.
=== Solaris ===
* Set SAGE64 to "yes", then set SAGE_FORTRAN_LIB to a 32-bit library,
which might be /usr/local/lib/libgfortran.so Ensure an informative error
message is generated.
* Unset SAGE64, but set SAGE_FORTRAN_LIB to a 64-bit library, such as
/usr/local/lib/sparcv9/ libgfortran.so (SPARC) or
/usr/local/lib/amd64/libgfortran.so (Solaris x86) and ensure an
informative error message is generated. Something like this
{{{
configure: The environment variable
configure: SAGE_FORTRAN_LIB=/usr/local/gcc-4.4.1-sun-
linker/lib/sparcv9/libgfortran.so
configure: is a not a 32-bit dynamic library. SAGE64 was
configure: not set to "yes", so you intend to build 32-bit.
configure: The environment variables SAGE_FORTRAN_LIB and/or SAGE64
configure: are not set properly.
ERROR: You do not have all of the prerequisites needed
to build Sage from source. See the errors above.
make[1]: *** [installed/prereq-0.7] Error 1
}}}
== Notes to release manager ==
* I don't know enough about 'hg' to know how to handle the changes, when
a file changes name. Sorry ...
* prereq-0.7-install must be installed with execute permissions.
* prereq-0.6-install should be removed.
* prereq-0.6.tar should be removed.
* prereq-0.7.tar is not under revision control
* When this ticket is closed, #8024 and #7903 may be closed too.
--
Ticket URL: <http://trac.sagemath.org/sage_trac/ticket/8052>
Sage <http://www.sagemath.org>
Sage: Creating a Viable Open Source Alternative to Magma, Maple, Mathematica,
and MATLAB
--
You received this message because you are subscribed to the Google Groups
"sage-trac" group.
To post to this group, send email to [email protected].
To unsubscribe from this group, send email to
[email protected].
For more options, visit this group at
http://groups.google.com/group/sage-trac?hl=en.
