Don't know what your doing wrong, but I just mapped a drive and had Salive sent it to the mapped drive and it WORKS....
At 02:12 PM 1/9/04 -0000, you wrote: >Sorry, no spaces. My page name setting that did NOT work was > Z:\ss\ServerStatus.htm > >I tried htm and html, upper and lower case. Btw Z drive over the network. > >-----Original Message----- >From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] >Behalf Of Richard Temple >Sent: 09 January 2004 13:41 >To: [EMAIL PROTECTED] >Subject: RE: [SA-list] setup output html upload help required > > >Could the be a problem referencing a directory with spaces in it ? > >I have always tended to use the c:\progra~1 rather than c:\program file >- can't remember whether I did this because I saw a problem. > >-----Original Message----- >From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On >Behalf Of gene Martinez >Sent: 09 January 2004 13:31 >To: [EMAIL PROTECTED] >Subject: RE: [SA-list] setup output html upload help required > >No, you can have it point to any directory you want.. > >At 01:02 PM 1/9/04 -0000, you wrote: >>Gene >> >>Got it working now. My current feeling is that Page name must ONLY be >>an entry name -not a "dir\filname" combination. >> >>Andy >> >>-----Original Message----- >>From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] >>Behalf Of gene Martinez >>Sent: 09 January 2004 12:55 >>To: [EMAIL PROTECTED] >>Subject: RE: [SA-list] setup output html upload help required >> >> >>At 08:24 AM 1/9/04 -0000, you wrote: >>>Gene, >>> >>>Thanks for coming back. I have tried VERY hard to set up >>>setup/output/html page/default page properly. I have succeeded in >>>publishing to a local directory quite satisfactorily. But FTP'ing is >something else. >>> >>>I think my problem is to do with "page name" and/or "remote name" - >>>what they supposed to MEAN, and what are typical values. >>> >>>a) Page name >> >>Page name is the name and location that the file is created to on the >>local drive. ie: >>c:\salive\salive.html >>Also make sure that (Publish this webpage) is checked >> >>When ftping the page name is the file (html) that you want to ftp. You >>can have more than (1) htlm page generated by salive and this lets you >>select which (1) you want to work on and what you would like to do >with it. ie: >>ftp >> >>>I have worked out that this MUST resolve to a local file such as >>>"c:\abc.html" (the edit box has a "..." button next to it which helps >>>encourage this interpretation). And indeed anything that is not a >valid >>>filename such as "fred" generates errors. When FTP'ing what is the >>>usage >>of >>>Pagename? What does it mean to have an entry here? Surely template >>>or header/footer are parsed to create the entire final server status >page. >>>Also this file MUST exist. >>> >>>b) Remote name >> >>Remote name is the name you want to give to the file that you have >>ftp'ed, You may call it output.html on the local computer but need (or >>want) to call it mylist.html on the server your sending it to. >>Also you have it listed wrong below you have it as "\docs\popg\ss.html" >>this is not correct >>it should be docs/popg/ss.html no double quots and froward slash >> >>>This entry is at least badly documented. I initially thought was just > >>>some random name so I left it blank. Later I worked out it might mean > >>>the directory where the server status file was to be stored so I put >>>in "/docs/popg". Errors in the log showed that to be wrong. Finally >>>putting in "\docs\popg\ss.html", i.e. a directory and filename works - > >>>in that the error looks different. >>> >>>I have tried every permutation and combination in these boxes >>>imaginable - no success. I have read and re-read all the >>>documentation, I have read the FAQ and searched the archives. And I >am quite stuck right now. >>> >>>My current values for these fields are >>> page name = Z:\ss\ss.htm >>> remote name = \docs\ss.htm <- change to docs/ss.html >>but in looking above it should be docs/popg/ss.html >> >>Let me know if this gets you going in the right direction >> >>> >>>Andy >>>PopG >>> >>> >>> >>>-----Original Message----- >>>From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] >>>Behalf Of gene Martinez >>>Sent: 09 January 2004 02:01 >>>To: [EMAIL PROTECTED] >>>Subject: Re: [SA-list] setup output html upload help required >>> >>> >>>Got to setup/output/html page/defaultpage (it that is what you have >>defined) >>>check - publish this web page >>>page name - should have the directory and pagename.html upload via - >>>ftp ftp server - name remote file name - what do you wish to call file > >>>user name password >>> >>>it works I'm sending (1) to the web everytime it runs... >>> >>> >>>At 01:30 AM 1/9/04 -0000, you wrote: >>>>Ok I am a new user with a fresh download trying to monitor four >servers. >>>>Nothing I can do enables me to upload output to my web server. I am >>>>used >>>to >>>>posting files to the server - but salive generates the log file >>>> >>>>09 January 2004 01:25:14 Web page generation Default page >>>>09 January 2004 01:25:16 ERR FTP: problem during upload: Requested >>>>action not taken. File unavailable (e.g., file not found, no access). > >>>>( 40550) >>>> >>>>I have checked files exist - many times. tried all sorts of >>>>different things - no avail, >>>> >>>>Help! >>>> >>>>Andy >>>> >>>Regards, >>> >>>Gene >>> [EMAIL PROTECTED] >>> http://www.eclipse.net/~njkat >>> >>>To unsubscribe from a list, send a mail message to [EMAIL PROTECTED] >>>With the following in the body of the message: >>> unsubscribe SAlive >>> >>> >>Regards, >> >>Gene >> [EMAIL PROTECTED] >> http://www.eclipse.net/~njkat >>To unsubscribe from a list, send a mail message to [EMAIL PROTECTED] >>With the following in the body of the message: >> unsubscribe SAlive >> >>To unsubscribe from a list, send a mail message to [EMAIL PROTECTED] >>With the following in the body of the message: >> unsubscribe SAlive >> >> >Regards, > >Gene > [EMAIL PROTECTED] > http://www.eclipse.net/~njkat >To unsubscribe from a list, send a mail message to [EMAIL PROTECTED] >With the following in the body of the message: > unsubscribe SAlive > > >To unsubscribe from a list, send a mail message to [EMAIL PROTECTED] >With the following in the body of the message: > unsubscribe SAlive > >To unsubscribe from a list, send a mail message to [EMAIL PROTECTED] >With the following in the body of the message: > unsubscribe SAlive > > Regards, Gene [EMAIL PROTECTED] http://www.eclipse.net/~njkat To unsubscribe from a list, send a mail message to [EMAIL PROTECTED] With the following in the body of the message: unsubscribe SAlive
