SMTP2POP3 COM uses:
pops50.ocx
smtps50.ocx
comsmtp2pop3.dll
And from a registry point of view it needs:
SOFTWARE\DBU Consulting\Servers
Alive\COMCheck\W00000008\Long_description
SOFTWARE\DBU Consulting\Servers
Alive\COMCheck\W00000008\Short_description
SOFTWARE\DBU Consulting\Servers Alive\COMCheck\W00000008\Object_Name
Internaly we will reference it using W00000008 and based on that ID we get
the Object_name from the registry.
The only reason I can see that it's not showing the interface is that the OS
is not able to load the DLL that we reference, being comsmtp2pop3.dll
As for why the OS can't do this, I have no clue at all.
Dirk.
Don't forget to vote for Servers Alive in the annual Sunbelt Target Awards
http://www.sunbelt-software.com/targetawards/
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf
Of Nate
Sent: Wednesday, May 05, 2004 10:15 PM
To: [EMAIL PROTECTED]
Subject: RE: [SA-list] SMTP2POP3 Errors
Hi Dirk,
Do you have any pointers on things I could check on this problem? What
files and versions are related to the SMTP2POP3 COM check? What about
registry keys? What would cause ServersAlive to lose its reference to the
SMTP2POP3 COM component? It's still odd to me that clicking the "Configure"
button after the checks begin failing doesn't bring up the SMTP2POP3
configuration page.
This machine is dedicated to ServersAlive, so there aren't any other apps
that would be conflicting.
Nate
At 09:44 AM 4/23/2004, you wrote:
>Without restarting the app (in other words, it's still showing the
>SMTP2POP3 COM checks as failing):
>
>When I attempt to create a new COM Mailflow Check, I click the "Configure"
>button, and nothing happens. I click it again. Nothing happens. I switched
>the check to Eventlog Check and click "Configure". This time the
>configuration page for Eventlog Check comes up. I cancel and switch back
>to Mailflow check, then click "Configure". Nothing happens. When I say
>nothing happens, I mean the button depresses, then raises back up again,
>but there is no error message, no dialog box, no delay. Nothing to
>indicate that it is attempting to do anything at the time the button is
>clicked.
>
>Here are versions of files that may or may not be relevant:
>
>pop50.ocx 5.0.0.1446
>pops50.ocx 5.0.0.1147
>smtps50.ocx 5.0.0.1147
>
>Thanks.
>
>Nate
>
>At 08:32 AM 4/23/2004, you wrote:
>>if you create a new entry for the SMTP2POP3 check does it give the same
>>result?
>>What is the version of the pops50.ocx file?
>>
>>Dirk.
>>
>>Woodstone's office are closed from April 22nd until April 26th 2004.
>>
>>Don't forget to vote for Servers Alive in the annual Sunbelt Target Awards
>>http://www.sunbelt-software.com/targetawards/
>>
>>-----Original Message-----
>>From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
>>Behalf Of Nate
>>Sent: Friday, April 23, 2004 3:29 PM
>>To: [EMAIL PROTECTED]
>>Subject: RE: [SA-list] SMTP2POP3 Errors
>>
>>
>>Hi Dirk,
>>
>>I ran ServersAlive as an app for a few days, and at about 11:45 last
night,
>>I began getting the same error again. Here are the log file lines (same as
>>before):
>>
>>
>>Thursday, April 22, 2004 11:48:37 PM External COM check started
>>(W00000008,175)
>>
>>Thursday, April 22, 2004 11:48:37 PM External COM check
(W00000008,175):ERR
>>docheck : Component 'pops50.ocx' or one of its dependencies not correctly
>>registered: a file is missing or invalid( 339- 600)
>>
>>Thursday, April 22, 2004 11:48:38 PM External COM check started
>>(W00000008,176)
>>
>>Thursday, April 22, 2004 11:48:38 PM External COM check
(W00000008,176):ERR
>>docheck : Component 'pops50.ocx' or one of its dependencies not correctly
>>registered: a file is missing or invalid( 339- 600)
>>
>>
>>I've left the app running with the checks failed, so if you want me to try
>>something before restarting it, let me know.
>>
>>Nate
>>
>>
>>At 12:18 PM 4/20/2004, you wrote:
>> >Is it an option to run SA as appliacation? I mean for a test to see if
that
>> >also gives the error?
>> >We tested it running as a service and never got the SMTP2POP3 Com error
you
>> >got.
>> >
>> >
>> >
>> >I did several tests with hostfiles from people with slow responding GUIs
>>and
>> >was not able to reproduce this behaviour.
>> >
>> >
>> >Dirk.
>> >Don't forget to vote for Servers Alive in the annual Sunbelt Target
Awards
>> >http://www.sunbelt-software.com/targetawards/
>> >
>> >-----Original Message-----
>> >From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On
>>Behalf
>> >Of Nate
>> >Sent: Tuesday, April 20, 2004 5:42 PM
>> >To: [EMAIL PROTECTED]
>> >Subject: [SA-list] SMTP2POP3 Errors
>> >
>> >ServersAlive Version 4.1.1591
>> >COMSMTP2POP3.dll Version 1.0.0.15
>> >Running as a service under LocalSystem context on Windows 2000
Professional
>> >SP4
>> >
>> >Using the SMTP2POP3 COM check, I have configured the SMTP part to send
on
>> >odd cycles (1,3,5,7,9...) and POP3 checks to run on even cycles
>> >(2,4,6,8...).
>> >
>> >I have noticed that this setup runs fine for a while, then suddenly
begins
>> >logging the following error: "ERR docheck : Component 'pops50.ocx' or
one
>> >of its dependencies not correctly registered: a file is missing or
invalid(
>> >339- 600)". This error occurs every time until I stop and restart the
>> >ServersAlive service. The last three times this has happened, it has
taken
>> >1702, 607, and 728 check cycles before the error begins to occur -- that
>> >translates to roughly 153, 62, and 84 hours, respectively.
>> >
>> >I have tried re-registering the pops50.ocx file while SA is running
using
>> >"regsvr32.exe c:\winnt\system32\pops50.ocx". This did not work.
>> >
>> >Here are the related lines from the SA log (using maximum logging):
>> >
>> >Monday, April 19, 2004 8:07:59 PM External COM check started
>>(W00000008,175)
>> >Monday, April 19, 2004 8:07:59 PM External COM check (W00000008,175):ERR
>> >docheck : Component 'pops50.ocx' or one of its dependencies not
correctly
>> >registered: a file is missing or invalid( 339- 600)
>> >Monday, April 19, 2004 8:07:59 PM External COM check started
>>(W00000008,176)
>> >Monday, April 19, 2004 8:07:59 PM External COM check (W00000008,176):ERR
>> >docheck : Component 'pops50.ocx' or one of its dependencies not
correctly
>> >registered: a file is missing or invalid( 339- 600)
>> >
>> >Nate
>> >
>> >P.S. Did anyone ever determine what was causing slow GUI response when
>> >deleting or moving checks. I have that problem too and was waiting to
hear.
>> >
>> >---
>> >[This E-mail scanned for viruses by Declude Virus]
>> >
>> >To unsubscribe from a list, send a mail message to [EMAIL PROTECTED]
>> >With the following in the body of the message:
>> > unsubscribe SAlive
>> >
>> >
>> >
>> >---
>> >[This E-mail scanned for viruses by Declude Virus]
>> >
>> >To unsubscribe from a list, send a mail message to [EMAIL PROTECTED]
>> >With the following in the body of the message:
>> > unsubscribe SAlive
>>
>>---
>>[This E-mail scanned for viruses by Declude Virus]
>>
>>To unsubscribe from a list, send a mail message to [EMAIL PROTECTED]
>>With the following in the body of the message:
>> unsubscribe SAlive
>>
>>---
>>[This E-mail scanned for viruses by Declude Virus]
>>
>>To unsubscribe from a list, send a mail message to [EMAIL PROTECTED]
>>With the following in the body of the message:
>> unsubscribe SAlive
>
>---
>[This E-mail scanned for viruses by Declude Virus]
>
>To unsubscribe from a list, send a mail message to [EMAIL PROTECTED]
>With the following in the body of the message:
> unsubscribe SAlive
To unsubscribe from a list, send a mail message to [EMAIL PROTECTED]
With the following in the body of the message:
unsubscribe SAlive
---
[This E-mail scanned for viruses by Declude Virus]
To unsubscribe from a list, send a mail message to [EMAIL PROTECTED]
With the following in the body of the message:
unsubscribe SAlive
